PVC JOINERY

Łączniki

Connectors are used to correctly join one framework with another to create sets. Connectors can be divided into 3 main categories: Windows connectors, which allow the joining of a few frameworks into one set

  • Windows connectors, which allow the joining of a few frameworks into one set
  • Angled connectors, which allow connected frameworks at a fixed or variable angle
  • Static connectors, which have additional steel reinforcement are responsible for the stable connection in the construction of large window sizes or large surface areas for which an important factor is the strength of the load pressure and wind suction.
Feather window connector
  • Frame offset X = 0mm
    To be used with ideal 4000, 5000, 7000 and 8000

Window connector H
  • Frame offset X = 5mm
    To be used with ideal 4000, 5000, 7000 and 8000

Window connector Large H
  • Frame offset X = 2.5mm
    To be used with ideal 4000, 5000 and 8000

Two-piece window connector
  • Frame offset X = from 8mm to 13mm
    To be used with ideal 4000, 5000 and 7000

Angle connector 135
  • Fixed angle connector 135°
    To be used with ideal 4000, 5000, 7000 and 8000

Angle connecor 90
  • Fixed angle connector 90°
    To be used with ideal 4000, 5000, 7000 and 8000

Variable angle connector (tube)
  • Variable angle connector
    To be used with ideal 4000, 5000, 7000 and 8000

Fixed static connector
  • Frame offset X = 21mm
    Moment of inertia depending on steel LX=20,4 or lx=43,3 cm4
    To be used with ideal 4000 and 5000

Static connector so called "dog bone"
  • Frame offset X = 13mm; moment of inertia lx = 59cm4
    To be used with ideal 4000 and 5000

Telescopic static connector
  • Frame offset X = 13mm; moment of inertia lx = 66,7cm4
    To be used with ideal 4000, 5000, 7000 and 8000

OUR PARTNERS